Sony DVP-NC685V - Manual (Page 33)

33
Pl
ay
in
g Di
sc
s
Resuming Playback From
the Point Where You
Stopped the Disc
(Multi-disc
Resume)
The player stores the point where you stopped
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. The player remembers the stopped point
of the disc even after you play other discs in
the disc tray. When you store a resume
playback point for the 7th disc, the resume
playback point for the first disc is deleted.
1
While playing a disc, press x to
stop playback.
“RESUME” appears on the front panel
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in step 1.
z Hints
• To play from the beginning of the disc, press x
twice, then press H.
• For DVD-RWs in VR mode, CDs, Super Audio
CDs, and DATA CDs, the player remembers the
resume playback point for the current disc.
The point where you stopped is cleared when:
– you press DISC SKIP or DISC SELECT.
– you opened the disc tray.
– you disconnect the power cord.
– the player enters standby mode (DATA CD
only).
• To turn off the Multi-disc Resume function, set
“MULTI-DISC RESUME” in “CUSTOM
SETUP” to “OFF” (page 74). Playback restarts at
the resume point only for the current disc in the
player.
Notes
• “MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 74).
• The resume playback point for the current disc is
cleared when:
– you change the play mode.
– you change the settings on the Setup Display.
• Resume Play does not work during Shuffle Play
and Program Play.
• This function may not work with some discs.
• If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
H x