Shark LIGHT & EASY S3250 11 - Manual (Page 3)

TOLL FREE: 1-800-798-7398
ASSEMBLE
1 Fit together the extension tubes
as shown in the illustration.
(
fig. 1)
2 Place the micro-fiber cleaning
pad underneath the mop head,
with quick fastener strips facing
up. Simply press the mop to the
pad to attach it. (
fig. 2)
BACKSAVER
5 Use the Shark ® Light &
Easy™ with backsaver
benefit to access tight
areas. Press the release
button on the handle
to lock the
Light &
Easy™ Steam Mop in the
backsaver position. Press
the release button on the
handle again to straighten
the handle. (
fig. 5)
STEAM CLEANING
4 Plug in the mop. Wait 30
seconds for the unit to heat up
and the steam to be ready.
Push the handle toward the
mop head in a pumping motion.
Customize steam output by slow
or fast mopping with a forward
and backward motion. (
fig. 4)
Quick S
tart
www.sharkclean.com
FILL
3 Remove the cap to fill the
water tank. Use the filling flask
and funnel to fill the tank with
water to the “MAX” fill line.
Replace the water tank cap.
(
fig. 3)
Quick Start
fig. 1 fig. 2
fig. 4
fig. 5
fig. 3
S3250_instructions_100526.indd 4-5 10-05-27 9:58 AM