Shark LIGHT & EASY S3250 11 - Manual (Page 6)

4 TOLL FREE: 1-800-798-7398 5 www.sharkclean.com
English
ATTACHING THE MICRO-FIBER PAD
1 Place the micro-fiber cleaning pad
on the floor with the quick fastener
strips facing up. Place the
Light &
Easy™ Steam Mop on the top of the
pad to attach. (
fig. 1)
IMPORTANT: Only add water to
the tank. Chemicals or cleaning
solutions may be unsafe or cause
damage.
Replacement micro-fiber pads are
available at
www.sharkclean.com or
by calling 1-800-798-7398.
Getting Started
FILLING THE WATER TANK
IMPORTANT: Unplug the Light &
Easy™ Steam Mop before filling the
water tank with water. (
fig. 3)
1 Remove the water tank cap by
turning it counter-clockwise to the
unlocked position. (
fig. 4)
2 A filling flask and funnel are included
with your Light & Easy™ Steam Mop
to make filling the water tank easy.
Fill the flask with water and use the
funnel to pour it into the tank. Keep
the water level under the “MAX” fill
line. (
fig. 4)
3 Replace the water tank cap and turn
it clockwise to the locked position.
USING THE FRESH BREEZE SCENT
To add a light, clean fragrance to the
room, use the Fresh Breeze scented
pad spray.
1 Apply 1-2 mists to the back side
(mesh side) of the pad. (
fig. 2)
2 Apply the pad to the steam pad
and mop as usual. The steam will
activate the mist leaving you with a
fresh fragrance for the room.
IMPORTANT: DO NOT apply to the
side of the pad that contacts the
floor surface. Not for use on marble
floors.
Your micro-fiber cleaning
pads should be replaced
every 3 months to maximize
cleaning performance.
fig. 1
fig. 3
fig. 2
fig. 2
S3250_instructions_100526.indd 4-5 10-05-27 9:58 AM