Sanyo PDG-DET100L - Manual (Page 13)

13
Indicators
q
w
e
r
t
y
u
e wARNING TEMP . indicator
This indicator flashes red when internal projector
temperature is too high. (pp.70, 77-79)
u LAMP 2 REPLACE indicator
Turn orange when the life of the projection lamp2
draws to an end. (pp.66, 78)
q POwER indicator
This indicator lights green when the projector
is ready to be turned on. And it flashes green in
Power Management mode. (pp.57, 77-79)
w LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.77-79)
Part Names and Functions
r wARNING FILTER indicator
– Blink slow when the filter is being scrolled.
(pp.62, 77)
– Blink fast when the filter scroll is not working
properly. (pp.62, 79)
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement. (pp.61, 62, 79)
y LAMP 1 REPLACE indicator
Turn orange when the life of the projection lamp1
draws to an end. (pp.66, 78)
t SHUTTER indicator
Light blue when the shutter is closed. (p77)