Sanyo PDG-DET100L - Manual (Page 84)

84
Optional Parts
Model No.
Wired Remote Cable(30m) : POA-CA-RC30
Optional Interface Board (DVI) : POA-MD18DVI
Optional Interface Board (5-BNC) : POA-MD16VD1
Optional Interface Board (D-sub 15) : POA-MD04VGA
Optional Interface Board (Dual-SDI) : POA-MD17SDID
Optional Interface Board (DVI / D-sub 15) : POA-MD23ADI
Optional Interface Board (5-BNC / VIDEO) : POA-MD25VD3
Optional Interface Board (WARP & BLENDING) : POA-MD21WARP
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No.
to the sales dealer.
Appendix
l The specifications are subject to change without notice.
l Each projector has its own characteristics.
When projecting with several projectors on the same screen or side by side, you may recognize different white balance
and color uniformity on each projector.
✔ Note:
• When you use the WARP & BLENDING board, you should set the Edge blending function of this projector to ‘Off’ and do not use the
Edge blending function of this projector.
• Between the two features of the provided Real Color Manager Pro (CD-ROM); "Color Correction" and "Gamma Correction", "Color
Correction" is not available with this projector.