Copying movies on a tape to the computer, Recommended connection – Sony HVR-A1N User Manual

Page 81

Advertising
background image

81

Using a computer

HVR-A1U/A1N 2-639-667-11(1)

For Macintosh users

 Close down all applications running on the

computer.

 Drag and drop the drive icon on the

desktop onto the [Trash] icon.

 Disconnect the USB cable (supplied) from

the camcorder and computer.

• If you are using Mac OS X, turn off the

computer before disconnecting the USB cable
and ejecting the “Memory Stick Duo.”

• Do not disconnect the USB cable while the

access lamp is lit.

• Make sure to disconnect the USB cable

(supplied) before turning off your camcorder.

Recommended connection

Connect as shown in the following
illustrations to operate the camcorder
correctly.

• Connect the camcorder to a computer via the

USB cable (supplied). Make sure no other USB
devices are connected to the computer.

• If your computer has a USB keyboard and

a USB mouse as standard equipment, leave
them connected and connect the camcorder
to an available USB jack with the USB cable
(supplied).

• Operation is not guaranteed if you connect two

or more USB devices to the computer.

• Operation is not guaranteed if you connect the

USB cable to the USB jack on a keyboard or
USB hub.

• Make sure to connect the cable to the USB jack

on the computer.

• Operation is not guaranteed on all the

recommended environments.

Copying movies on a

tape to the computer

Connect your camcorder to the computer
with an i.LINK cable (optional).
The computer needs to be provided with
an i.LINK connector and be installed
with editing software that can copy HDV
signals. The software required depends on
the format of the recorded pictures and the
format for copying to the computer (HDV
or DVCAM (DV)) as shown in the table
below.

Format for

copying

to the

computer

Recorded

format

Required software

HDV

HDV

Editing software
capable of copying
HDV signal

DVCAM

(DV)

HDV

Editing software
capable of copying
DVCAM (DV)
signal

DVCAM

(DV)

DVCAM

(DV)

Editing software
capable of copying
DVCAM (DV)
signal

• Refer to the operating instructions of the

software for the details on image copying.

• Refer to the operational instruction of the

editing software for the recommended
connection.

• Some editing software on the computer may not

work correctly.

i.LINK cable (optional)

HDV/DV Interface

(i.LINK) jack

Continued

Advertising