Troubleshooting, Overall operations, Batteries/power sources – Sony HVR-A1N User Manual

Page 83

Advertising
background image

83

Troubleshooting

HVR-A1U/A1N 2-639-667-11(1)

Troubleshooting

If you run into any problems using your camcorder, use the following table to troubleshoot
the problem. If the problem persists, remove the power source and contact your Sony dealer.

Overall operations

The power does not turn on.

• The battery pack is discharged, running low, or not attached to the camcorder.
• Attach a charged battery pack to the camcorder (p. 10).
• Use the AC Adaptor to connect to a wall outlet (p. 10).

The camcorder does not operate even when the power is set to on.

• Disconnect the AC Adaptor from the wall outlet or remove the battery pack, then reconnect

it after about 1 minute. If the functions still do not work, press the RESET button (p. 27)
using a sharp-pointed object. (If you press the RESET button, all settings, including the
clock setting, are reset, except the Personal Menu items.)

The camcorder gets warm.

• The camcorder may get warmer while you use it. This is not a malfunction.

Batteries/Power sources

The power abruptly turns off.

• Turn on the power again (p. 13), or use the AC Adaptor.
• Charge the battery pack (p. 10).

The CHG (charge) lamp does not light while the battery pack is being charged.

• Slide the POWER switch up to OFF (CHG) (p. 10).
• Attach the battery pack to the camcorder correctly (p. 10).
• No power is supplied from the wall outlet. (p. 10).
• The battery charge is completed (p. 10).

The CHG (charge) lamp flashes while the battery pack is being charged.

• Attach the battery pack to the camcorder correctly (p. 10). If the problem persists, disconnect

the AC Adaptor from the wall outlet and contact your Sony dealer. The battery pack may be
damaged.

The power turns off frequently although the remaining battery time indicator

indicates that the battery pack has enough power to operate.

• A problem has occurred in the remaining battery time indicator, or the battery pack has not

been charged enough. Fully charge the battery again to correct the indication (p. 10).

Continued

Advertising