Symbol Technologies DS 6608 - Manual (Page 24)

DS 6608 Product Reference Guide 1-6
Mounting the Digital Scanner
Desk Mount
Use the optional desk mount for convenient and protective placement of the digital scanner on a flat surface. Simply place the mount
on the surface. The rubber feet hold the mount securely in place when inserting and removing the digital scanner.
Figure 1-5. Inserting the Digital Scanner in the Desk Mount
The desk mount can also be secured to a desk surface by inserting two screws* appropriate for the mounting surface through the
screw holes of the desk mount, and into the surface. The desk mount can be screwed onto the surface with or without the rubber feet.
*The recommended screws are two #6 screws (5/8” long).
Wall Mount
To use the optional wall mount to mount the digital scanner on a wall, place the mount in the desired location on the wall and secure
by inserting two screws* appropriate for the mounting surface through the screw holes on the mount, and into the surface. Insert the
digital scanner into the mount as shown.
Figure 1-6. Securing the Wall Mount
*The recommended screws are two #6 screws (1” long) and two #6 washers.