Symbol Technologies DS 6608 - Manual (Page 240)

DS 6608 Product Reference Guide 15-8
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on page 15-31 allows a pause to be inserted in the data transmission. Pauses
are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second intervals. For example, scanning bar
codes “0” and “1” inserts a 0.1 second pause; “0” and “5” inserts a 0.5 second delay. See
Appendix D, Numeric Bar Codes . To correct
an error or change a selection, scan Cancel on page D-4 .
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule
.
Begin New Rule
Save Rule
Scan this bar code to save the rule.
Save Rule