Stop bit select, Data bits, Stop bit select -12 – Symbol Technologies DS 6608 User Manual
Page 94: Data bits -12, Stop bit select -12 data bits -12
Advertising
DS 6608 Product Reference Guide
7-12
Stop Bit Select
The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares the receiving
device for the next character in the serial data stream. The number of stop bits selected (one or two) depends on the number the
receiving terminal is programmed to accommodate. Set the number of stop bits to match host device requirements.
Data Bits
This parameter allows the digital scanner to interface with devices requiring a 7-bit or 8-bit ASCII protocol.
*
1 Stop Bit
2 Stop Bits
7-Bit
*
8-Bit
Advertising