Sony CMT-GPX9DAB - Manual (Page 24)

24 GB
Press DISPLAY while listening to the radio.
Each time you press the button, the display
changes cyclically as follows:
Station name
1) t Preset number 2) and
frequency t Clock display (for eight seconds)
t Bass level (for eight seconds) t Treble
level (for eight seconds)
1) European model only
2) Preset number is displayed only if you preset radio
stations (page 13).
Checking the DAB station
information
You can check the status of this tuner and the
information about the program using the
display.
Press DISPLAY repeatedly when tuning in a
DAB station.
Each time you press the button, the display
changes cyclically as follows:
Service component label
t
Preset number +
Frequency (for two seconds) 1) t
Channel
label + Frequency (for two seconds)
t
DLS
(Dynamic Label Segment) 2) t
Ensemble label
(until scroll ends) 3) t
Clock display (for eight
seconds)
t
Bass level (for eight seconds)
t
Treble level (for eight seconds)
1) Preset number is displayed only if you preset radio
stations (page 13).
2) If there is no information in a service component,
“NO TEXT” appears.
3)
If an ensemble does not have a label, “NO LABEL”
appears.
Note
When “STEREO” appears in the display, the current
programme is broadcasted in the stereo/joint
(intensity) stereo mode.
Viewing the tuner
information in the display