Select one of the options, and press enter, When the timer settings overlap, Press o return – Sony RDR-GX700 User Manual

Page 46

Advertising
background image

46

4

Select one of the options, and press
ENTER.

“Modify”: Changes the timer setting. Select
an item using

</, and adjust using M/m.

Select “OK” and press ENTER.

“Erase”: Erases the timer setting. Select “OK”
and press ENTER.

“Check Overlap”: Checks for overlapped
settings.

Select “Close” to return to the Timer List.
To change or cancel the setting, repeat steps 3
and 4 above.

When the timer settings overlap

The programme that starts first has priority and the
second programme starts recording only after the
first programme has finished.

When the recordings start at the same time
The programme that is set last has priority. In this
example, timer setting B is set after A, so the first
part of timer setting A will not be recorded.

When the end time of one recording and the
start time of another are the same
After finishing the previous recording, the other
recording may be delayed.

To turn off the Timer List

Press O RETURN.

z

Hint

While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 44).

Notes

• When “PDC/VPS” is set to “On” for one or more timer

recordings, the start times may change in the event of a
broadcast delay or early start.

• Even if the timer is set, timer recordings cannot be

made while recording a programme that has priority.

• Even if the timer is set for the same daily or weekly

programme, the timer recording cannot be made if it
overlaps with a programme that has priority. “

” will

appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.

Modify

Modify the timer setting.

Date

Mon-Sat

22

Start

Prog.

Mode

OK

00

:

22

Stop

15

:

SP

Off

AAB

Cancel

VPS

PDC

Erase

Are you sure you want to erase this timer setting?

Mon-Sat 22:00-22:15 AAB SP

OK

Cancel

Check Overlap

These timer settings overlap.

Close

Fri 29.10 21:00-22:00 AAB

Fri 29.10 21:30-22:30 DEF

SP

LP

PDC/VPS

PDC/VPS

7:00

8:00

9:00

10:00

A

B

will be cut off

7:00

8:00

A

B

9:00

10:00

7:00

8:00

9:00

10:00

A

B

Advertising
This manual is related to the following products: