Sony SNC-xx - Manual (Page 6)


“DHCP Enabled No”
is displayed.
When using Windows XP
“Manually Configured”
is displayed in the [Local Area
Connection Status].

Go to step 7-a . (Page 7)
“DHCP Enabled Yes”
is displayed.
When using Windows XP
“Assigned by DHCP”
is displayed in the [Local Area
Connection Status].

You need do nothing else here.
Close any windows opened
in step
2 or later, and go to
2
Setting the IP Address
of the Camera
.
(Page 11)
6 When [Network Connection Details] is displayed,
check the DHCP status.
3 2 1
Confirming the Settings
of the Computer
Place a check mark in the following box corresponding to
the type of address in the “Address Type” box.
Be sure to confirm the type of address displayed here,
because the operations required in future setting
procedures are different, depending on the type of
address.