Control codes, 2. control codes used in print mode setting, 3. control codes used in line spacing – Star Micronics SP200F SERIES User Manual
Page 22
– 19 –
ENGLISH
6. Control Codes
STAR mode
6-1. Control Codes Used in Character Setting
Control codes
Hexadecimal codes
Function
<ESC> “R” n
1B 52 n
Select international character set. Default is accord-
ing to the dip switch settings 3, 4 and 5.
<ESC> “M”
1B 4D
Select 7
×
7 (Half dots) character size (Default
setting)
<ESC> “P”
1B 50
Select 9
×
7 (Half dots) character size
<SO>
0E
Select expanded character mode
<SI>
0F
Cancel expanded character mode
(Default setting)
<DC4>
14
Cancel expanded character mode
(Default setting)
<ESC> “W” “1”
1B 57 31
Select expanded character mode
<ESC> “W” <1>
1B 57 01
<ESC> “W” “0”
1B 57 30
Cancel expanded character mode
<ESC> “W” <0>
1B 57 00
(Default setting)
6-2. Control Codes Used in Print Mode Setting
Control codes
Hexadecimal codes
Function
<ESC> “4”
1B 34
Red color print selection (enable for SP216/246)
<ESC> “5”
1B 35
Red color print deselection (enable for SP216/246)
(Default setting)
<ESC> “E”
1B 45
Emphasized print mode selection
<ESC> “F”
1B 46
Emphasized print mode deselection (Default set-
ting)
6-3. Control Codes Used in Line Spacing
Control codes
Hexadecimal codes
Function
<LF>
0A
Line feed
<CR>
0D
Line feed (same as LF)
<ESC> “a” n
1B 61 n
Feed paper n lines