Sony T300 - Manual (Page 20)

No
t fo
r C
om
me
rci
al U
se
22 Personalizing your phone
Note: To send a ring signal or melody in a text
message, see “To insert an item in a text message” on
page 49.
To receive a sound or melody
1. From standby, press , scroll to Activate IR, YES .
2. When you receive the sound or melody, press YES to
save it in My sounds.
Increasing ring
You can choose a ring signal that rises in steps from
the lowest volume to the highest.
To turn increasing ring On or Off
• Scroll to Settings/Sounds & alerts/Increasing ring.
Specific ring signals for personal calls
If you subscribe to the Two Line Service, you
can set different ring signals for the two voice
lines. Line 1 and Line 2 are displayed instead
of Voice calls.
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a personal
ring signal to numerous callers.
To set a specific ring signal for a caller
1. Scroll to Phone book, YES , Personal rings, YES ,
Add new?, YES .
2. Enter the first letter of the contact name, YES .
3. Select a contact, YES .
4. Select a ring signal, YES .
Sounds & alerts
You can choose to be notified of an incoming call by
the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to one of the following:
• On – all the time.
• On if silent – on when the ring volume is turned off or
when you have set the phone to silent.
• Off – all the time.
To set the vibrating alert
1. Scroll to Settings, YES , Sounds & alerts, YES , Vibrating
alert, YES .
2. Select the setting you want, YES .
From Settings/Sounds & alerts, you can also select:
• Message alert when messages are received.
• Key sound when using the keypad.
• Minute minder to beep after every minute during calls.