Sony T300 - Manual (Page 31)

No
t fo
r C
om
me
rci
al U
se
Calling 33
• Select Reset timers to reset the call time meter.
Call cost
For cost information you need to check with
your network operator or service provider if
you can subscribe to such a service, where
call cost (or the number of call units) is
displayed.
If you have a subscription with a cost information
service, you can check the cost of your last call and
the total cost of your calls.
To check the call cost and reset
• Scroll to Calls/Time & cost/Call costs and select
an option.
• Select Clear total cost to reset the call cost meter.
Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Setting the call cost
You can use the Rate function to specify the price per
call unit. If you do not specify a price per call unit, the
number of call units is displayed.
To enter the price per call unit
1. Scroll to Calls, YES , Time & cost, YES , Call costs, YES ,
Set rate, YES .
2. Enter your PIN2, YES .
3. Select Change, YES .
4. Enter the code for the currency you want, (for example
USD for US Dollars), YES .
5. Enter the price per call unit, YES .
To enter a decimal point, press .
Credit limit for calls
You can enter a total amount of money that
can be used for making calls. When the
amount reaches zero, no more calls can be
made. Please note that the credit limit is only an
estimated value.
To set a credit limit
1. Scroll to Calls, YES , Time & cost, YES , Call costs, YES ,
Set credit, YES .
2. Enter your PIN2, YES .
3. Select Change, YES .
4. Enter an amount, YES .
See “Security” on page 65 for more information about
PIN2.