Setting up mobile internet, Setting up mobile internet 41, No t fo r c om me rci al u se – Sony T300 User Manual

Page 39

Advertising
background image

No

t fo

r C

om

me

rci

al U

se

Setting up mobile Internet

41

Setting up mobile Internet

In order to use the Internet, browse via WAP

services or send and receive multimedia and

e-mail messages, the following are required:

1. A phone subscription that supports data

transmission.

2. Settings entered in your phone.

• Settings may already be entered when you buy your

phone.

• You can receive settings in a text message from your

network operator or service provider.

• Settings are also available at www.SonyEricsson.com/

3. You may also have to register as a WAP/e-mail user

with your service provider or network operator.

Receiving settings in a text message
Your GSM network operator or Internet service

provider may be able to send the required data account,

WAP and e-mail settings direct to your phone in a text

message (SMS).

To request settings from Sony Ericsson

1. Use a PC to go to http://www.SonyEricsson.com/.

Select your region and then use the Configurators to

request that a text message be sent to your phone with

the settings you need.

2. When the message arrives, New settings received.

Install? appears.
• Press

YES

to install the new settings

Note: If settings already exist in your phone you can
either keep or replace them. See “Advanced setting
information” on page 42
for more information.
• Press

NO

to cancel installation. A new request for

settings is then required, as in step 1.

3. After installation, see “Using mobile Internet” on

page 57.

Set up with the wizard
If your phone is not set up for WAP, you can ask your
network operator or service provider to provide you
with WAP settings information. Then you can simply
use the wizard in your phone to help guide you through
the relevant settings.

To use the wizard for setting up WAP

1. Scroll to WAP Services,

YES

, homepage (for example

Mobile Internet),

YES

. The wizard now starts if no

WAP settings exist.

2. Enter and save settings when asked, press

YES

to

confirm.

Advertising