Sony STR-DA3200ES - Manual (Page 102)

102 GB
Notes
• You cannot use the FRONT SPEAKERS B
terminals for a bi-amplifier connection.
• When you use the auto calibration function, make
the bi-amplifier settings before you perform auto
calibration.
• If you make the bi-amplifier settings, the speaker
level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.
• Signals output from the PRE OUT jacks are used
with the same settings as those of the SPEAKERS
terminals.
• The audio signal of the center speaker of the
MULTI CHANNEL INPUT jack is not output
from the front left/right speakers when you set
“SUR BACK SP” to “BI-AMP” in the Speaker
Settings menu.
Using the CONTROL S
Control System
If you have a CONTROL S-compatible Sony
TV, satellite tuner, monitor, DVD player or
VCR, use a CONTROL S connecting cord (not
supplied) to connect the CTRL S IN (for TV,
satellite tuner, or monitor) or CTRL S OUT
(for VCR, etc.) jack on the receiver to the
appropriate CONTROL S jack on the
respective component. Refer to the operating
instructions supplied with your TV, satellite
tuner, monitor, VCR, etc., for details.
If you connect the CTRL S OUT jack
on another component to the CTRL
S IN jack on this receiver
Example
The remote sensor on the CTRL S OUT
component receives remote codes the same
way as the remote sensor on this receiver. This
is useful if you have placed this receiver in a
rack, etc.
TV, VCR, tuner,
monitor, etc.
Receiver
Remote