Sony RM-VL1000 - Manual (Page 33)

33
8
Press the SET button.
The display returns to the
previous one.
Notes
• If you set a TV or an amplifier for
volume control setting to the TV or
AMP label displayed by default, the
signal of the preset component will
be transmitted. If you program any
signal for the VOL or MUTING
button of each component by
“learning”, the learned signal
programmed for each component will
be transmitted.
• Even if you preset another TV or
amplifier to a component label, when
the preset data of the TV or amplifier
for volume control setting to the TV
or AMP label displayed by default
will be not cleared, the signal of the
component preset by default will be
transmitted.
But if you set another TV or amplifier
for volume control setting, its signal
will be transmitted. In this case, its
learned signal will be transmitted if
you program any signal for the VOL
or MUTING button.
• If a TV or an amplifier set for volume
control setting has no preset data for
the VOL or MUTING button, the
signal cannot be transmitted.
• If you preset another category of
component than a TV or an amplifier
to the component label for which the
volume control setting has been
programmed, the signal of the VOL
or MUTING button cannot be
transmitted.
• When operating a component which
has no volume data, if you have
programmed any signal for its VOL
or MUTING button of each
component by “learning”, the learned
signal programmed for the
component is transmitted even if you
try to control the volume using the
volume control function.
• When controlling the volume of the
audio components, the signal of the
VOL or MUTING button or the
learned signal of the VOL or
MUTING button for the amplifier is
transmitted.
• When controlling the volume of the
visual components, if a TV is set for
volume control setting, the signal of
the VOL or MUTING button or the
learned signal of the VOL or
MUTING button for the TV is
transmitted.
• When controlling the volume of the
visual components, if an amplifier is
set for volume control setting, the
signal of the VOL or MUTING button
for the amplifier is transmitted for the
TV. But if you program any signal for
the VOL or MUTING button of the
TV, its learned signal is transmitted
for the TV.