Sony R-DG1200 - Manual (Page 112)

112 US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\090OTH.fm masterpage: Left
STR-DG1200
3-289-135-11(1)
3 Press CATEGORY + or CATEGORY –
to select the category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4 Press TUNING + or TUNING – to select
the channel.
You can also press TUNING MODE on the
receiver to select “AUTO”, then turn
TUNING +/– to select the channel.
Selecting a channel number
directly (Direct tuning)
1 After selecting a satellite tuner, press
SHIFT, then press D.TUNING.
2 Press the numeric buttons to enter the
channel number, then press
to
enter.
Displaying the satellite tuner
information
Press DISPLAY repeatedly.
Each time you press DISPLAY while tuning in
the channel, the display changes cyclically as
follows:
Channel name
t Channel number t
Category name t Artist name/Feature t
Song/program title t Composer name
(SIRIUS only) t Signal strength t Sound
field type t Volume level
1
Select a channel you want to
preset.
For details on this operation, see
“Selecting channels from a category
(CATEGORY TUNING)”.
2
Press SHIFT, then press ENT/
MEM.
“MEM” lights up on the display window.
3
Press PRESET + or PRESET –
to select a preset number.
You can also select the number by
pressing the numeric buttons. Preset
numbers from 1 to 30 are available.
Channel 1 is preset for the preset numbers
when you purchase the receiver.
4
Press ENT/MEM.
5
Repeat steps 1 to 4 to preset
another channel.
Selecting a preset channel
1 Press XM to select “XM RADIO” or
press SIRIUS to select “SIRIUS”.
2 Press PRESET + or PRESET –
repeatedly to select the preset channel
you want.
You can also press SHIFT, then press the
numeric buttons to select the preset channel
you want. Then, press
to enter the
selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET”,
then turn TUNING +/– to select the preset
channel you want.
Presetting satellite tuner
channels