Entering and using programs, E 86), Initial procedure – Sharp FO-4470 User Manual
Page 88: Entering and using programs 86, Press , and, Press to select set, Press, Menu
Entering and Using Programs
86
Entering and Using Programs
If you frequently perform the same operation involving the same party, you can
program all the steps of the operation into one Program Key. This allows you to
perform the operation by simply pressing that key.
♦
Any Rapid Key which is not already programmed as a Rapid Key or a
Group Key can be used as a Program Key.
♦
You can include a timer setting in the program to have the operation
performed automatically at a selected time.
♦
To clear a mistake in the procedures that follow, press
.
Initial procedure
To program a Program Key, first perform the following procedure. After you
have completed this procedure, go to the procedure for the specific operation
you want to program (see the following pages).
STOP
1
Press ,
and
.
2
Press
to select SET.
3
Select a Program Key by pressing any
Rapid Key that has not yet been
programmed.
4
Enter a name for the program by pressing the letter entry keys (see Step
5 on page 25). (Maximum of 20 characters.)
If you don’t want to enter a name, go directly to Step 5.
5
Press .
MENU
5
1
1
START/
ENTER
Display:
1:PROGRAM ENTRY MODE
1=SET, 2=CLEAR
1:PROGRAM SET
PRESS PROGRAM KEY
Q / !
W / "
E / #
R / $
T / %
Y / &
U / '
I / (
O / )
P / =
SYMBOL
A / |
S
D
F
G / {
H / }
J / [
K / ]
L / +
Caps Lock
Z / <
X / >
C
V
B
N / *
M / ?
@
.com
SHIFT
/ ^
/ / \
; / :
Space
_
-
. / ,
DEL
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39