Sony WEGA KZ 42TS1 - Manual (Page 11)

(US)
11
Installing and Connecting the TV
US
When using your audio system speakers
Set “Speaker” to “Off” on the (Custom Setup) menu. Sound of the TV is
not output through the TV’s speakers.
Tip
The sound signal of an equipment connected to the COMPONENT VIDEO IN jacks is also
output through the AUDIO OUT jacks. Note that the video signal is not output.
Note
Even though you change the TV’s volume or other sound settings, the sound of your audio
system does not change.
Connecting an Audio Receiver
Disconnect all power sources before making any connections.
Using an AUDIO cable, connect the TV’s AUDIO OUT jacks to the audio
receiver’s AUDIO IN jacks.
HD VD
IN
OUT
P B /B Y/G P R /R L R AUDIO
L R
VHF/UHF
AC IN
AUDIO OUT
COMPONENT VIDEO IN 2 / RGB IN
SUB
WOOFER
CONTROL
S
VIDEO L R AUDIO P B Y P R L R AUDIO S VIDEO
VIDEO IN 1 COMPONENT VIDEO IN 1
VIDEO IN 2
AUDIO-L
(white) AUDIO-R (red)
RK-74A
(not supplied)
Rear of TV
Audio
input
Audio reciever
(DAV-S800 etc.)