Sony TA-F501ES - Manual (Page 12)

12 GB
Remote commander
RM-AAU012
Notes
• The remote command mode of the remote supplied
with this amplifier is fixed to CD1 for the
connected CD player. Set the remote command
mode of the CD player to CD1; otherwise, you
cannot operate the CD player using this remote.
• You can adjust the BASS and TREBLE levels
manually even when the LOUDNESS function is
set to ON. If you adjust the levels manually, the
LOUDNESS function will be switched to OFF,
automatically.
Name Function
A DISPLAY
ON/OFF
Press to turn the display in the
display window on and off.
B Input
buttons
Press one of the buttons to
select the component you want
to use.
C VOL +/–
Press to adjust the volume level
of speakers.
The level can be adjusted from
–
∞ dB to +23 dB.
D BALANCE
L/R
Press to adjust the balance
between left and right speakers.
Both the left and the right
balance can be adjusted from
0 dB to +20 dB. The initial
setting is 0 dB (center).
E Operation
buttons for a
Sony CD
player
You can only operate a Sony
CD player using this remote,
when you connect it to the this
amplifier.
H playback
X pause
x stop
./> select a track
m/M fast backward/
forward
F MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
G MENU
Press to display the menu for
the amplifier (page 16).
H V/v/B/b After pressing MENU (7),
press
V/v/B/b to select the
settings. Then press to
enter the selection (page 16).
I LOUDNESS Set the LOUDNESS function to
ON to adjust the BASS and
TREBLE levels output from the
speakers to the optimum
settings, based on the volume
level.
When you set the LOUDNESS
function to OFF, the BASS and
TREBLE levels will return to
the levels that had been adjusted
before the LOUDNESS
function was set to ON.
Initial setting is OFF.
J BASS/
TREBLE +/–
Press to adjust the BASS and
TREBLE levels. The level can
be adjusted from –10 dB to
+10 dB.
Name Function