Samsung DVD-V5600 - Manual (Page 12)

12 - English
AV Receiver Connections
Digital Audio out Jack
To take full advantage of the movie theater
experience that DVD offers, you may want to
connect your DVD-VCR to a complete Surround
Sound system, including an A/V Receiver and
six Surround Sound speakers. If your A/V
receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the
DVD-VCR’s built-in Dolby Digital Decoder. Use
the Digital Audio Out connection below.
1
Connect a Digital Audio coaxial cable from the
Digital Audio Out jacks on the panel of the DVD-
VCR to their corresponding Digital Audio Input
jacks on your A/V Receiver:
To Digital Audio Input of an A/V Receiver
with a Dolby, MPEG2, DTS, Digital Decoder
Progressive Scan (DVD only)
If the TV connected supports Progressive Scan,
press the P.SCAN button on the front panel in
stop mode.
• The message “Press OK to confirm
Progressive scan mode. Otherwise press
RETURN.” will be displayed. If you want
Progressive scan mode, select OK. Make sure
that the disc has stopped completely before
changing the mode.
• To cancel the progressive scan mode, press
the P.SCAN button in stop mode.
• Do not press the P.SCAN button if you are
using a TV that does not support Progressive
mode. Nothing will be displayed on the screen
if pressed. To release the Progressive mode,
press the P.SCAN button in stop mode.
• See your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s
instructions regarding Progressive Scan set-
tings in the TV’s menu system.
• Depending on your TV, the method of connec-
tion may differ from the illustration above.
• What is "Progressive Scan"? Progressive scan
has twice as many scanning lines as the inter-
lace output method has. Progressive scanning
method can provide better and clearer picture
quality.
• You must connect the player to the compo-
nent(s) before using the Progressive Scan fea-
ture.
• Make sure that the colour coded connections
match. That is, the Y, Pb and Pr component
output jacks of your DVD -VCR should be con-
nected to the exact corresponding component
input jacks on your TV. Otherwise, red or blue
images will be displayed on the TV screen.
• NTSC DVD disc is not supported.
Note
XEU ENG 2 27/02/2006 13:35 Page 12