Samsung DVD-V5600 - Manual (Page 39)

English - 39
Special Playback Features
During DVD/VCD/CD playback you can select
from the following special playback options.
To resume normal playback, press the Šll but-
ton.
Still
Press the Šll button during playback.
• The picture will still and the audio will mute.
• To resume playback, press the Šll button.
• If the player is left in still mode for 5 minutes, it
will stop automatically.
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP
button on the remote control to advance one
frame at a time.
• Audio is muted during frame advance mode.
• Press the Šll button to resume normal play-
back.
Skip Forward/Back
While a CD or DVD disc is in play mode, press
the l¥¥ or ŠŠl button to jump forward and
backward through disc chapters/tracks.
• Skip Forward (ŠŠl) will jump to the next
chapter/track.
• Skip Back (l¥¥) will jump to the beginning of
the current chapter/track.
• Press the l¥¥ button again to jump to the
beginning of the previous chapter/track.
Search Forward/Back
While a disc is in play mode, press the ¥¥ or
ŠŠ button to visually search forward/backward
at 2X - 4X - 8X - 16X - 32X - 128X speed. Press
the Šll button to resume normal speed.
• VCD/CD : 2X - 4X - 8X - 16X - 32
Slow Motion
During playback, press the Šll button to still the
image. Then press the ŠŠŠŠl button to play
in slow motion at variable speeds.
• Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.
• Frame Advance operates only in the forward direc-
tion.
3
ERASE and WRITE appears in turn at the
same location for about 40 sec during
firmware update.
4
It will be displayed DONE if the update is
completed successfully.
5
After update is completed, you have to power
off the unit and eject the update disc by using
the OPEN/CLOSE button once the unit turns
on.
6
Firmware update ir ended. Turn on your play-
er and enjoy a DivX movie.
• In order to check new version like the
upper, press the INFO button after
opening a tray.
ERASE
RETR 00
DONE
RETR 00
Code Ver : XXXXXXXXX
Servo Ver : XXXXXXXXX
• The display can be changed depend on its
version and without any notice.
Note
Note
XEU ENG 5 27/02/2006 13:37 Page 39