Samsung DVD-V5600 - Manual (Page 26)

26 - English
Using the Assemble Edit Function
This function allows you to start a new recording
at a specific position on the cassette while main-
taining a very smooth scene change.
1
Insert the cassette to be edited in your
DVD-VCR.
2
Press the Šll button to start playback.
3
When you reach the position from which you
wish to start the new recording,
press the Šll button.
4
Press the F.ADV/STEP button as often as
necessary to advance frame by frame, until
the exact recording position is located.
5
While the DVD-VCR is in still mode, hold
down the REC (
●) button for a while to acti-
vate the assemble edit function. The mode is
changed to pause.
6
Select the source from which you wish to
record by pressing:
• The PROG
or button for television
channels.
• The INPUT SEL. button for the AV1,AV2
or AUX.
7
Press the Šll button to start recording.
If you want to finish the recording, press the
■ button.
Using The Timer Programming
Feature
The Timer Programming feature allows you to
preset the DVD-VCR to record a programme up
to one month before that programme is to be
broadcast. Up to six programmes can be preset.
• Before presetting a recording, check that the
Date and Time are correct.
• You must check that the cassette tape is
loaded.
1
Press the MENU button, then press the › or
‚ button to select PROG.
2
Press the OK or Š button. The timer pro-
gramming menu is displayed.
3
Press the OK or Š button to select PR, then
press the ›or‚ button to select the required
station.
• Press the INPUT SEL. button to select an
input source (AV1, AV2 or AUX) other then
the tuner.
4
Press the Š button to select Day, then press
the › or ‚ button to select the required day.
MENU RETURN OK
SETUP
VCR
PROG
FUNK
DVD
Timer Method
If you want to set the
timer program, press
the OK key.
: :
: :
: :
: :
: :
: :
PR Day Start Stop Speed V/P
RETURN MENU OK
01 SU 01
XEU ENG 4 27/02/2006 13:36 Page 26