Siemens DTU3005-B - Manual (Page 22)

4
Creating Project Files—PLC to Devices
18 Siemens Energy & Automation, Inc.
3. Select the device from the list by pressing Enter or the
spacebar. The highlight moves to the Address field,
and the PLC register fields now display as shown in the
example screen below.
4. With the Address field highlighted, enter the device’s
address. This number should be between 1 and 254,
and match the number programmed into the device
itself. Press the Tab key twice to go to the Real-Time
Data Registers field.
5. Highlight the File field and enter the file number. This
parameter is used only with Allen-Bradley PLCs to
specify the file number in the PLC that contains the reg-
ister values that are transferred to or from the device.