Creating project files—modbus master to devices – Siemens DTU3005-B User Manual
Page 34
Advertising
![background image](/manuals/141962/34/background.png)
5
Creating Project Files—Modbus Master to Devices
30
Siemens Energy & Automation, Inc.
5.3
Modbus Setup—Port 1
You must have a Modbus Master to Devices project
file open to configure port 1 using the instructions in
this section. Select Port 1 (Modbus Master) from the
Edit
menu, and the Port 1 Modbus Master configura-
tion screen appears.
To select the protocol for the Modbus Master device
connected to port 1, highlight Modbus Protocol and
press Enter. The Modbus Master Protocol selection
menu appears:
Advertising