Sony HDCAM J-H1 - Manual (Page 30)

Chapter 4
Playback
Chapter 4 Playback
4-9
4-5 Tele-File 1) and Shot Mark Functions
The following operations will be available when using
the unit connected to a personal computer (PC) with
the optional JZ-1 software installed.
For details on installation and software operation, refer to
the “Readme” file and the “Help” file supplied with the JZ-
1 software.
Basic Operations Such as PLAY,
F FWD, REW, STOP, SHUTTLE,
and JOG.
You can perform basic operations such as PLAY,
F FWD, REW, STOP, SHUTTLE, and JOG via your
PC.
Reading Tele-File Data and Shot
Mark Data
If Shot mark data or Tele-File data have been
recorded, you can automatically read image and
related data based on the Shot mark or Tele-File data.
(You will need to install a video capture card in your
PC.)
An image that has been read will be displayed as a
thumbnail image. Double-clicking the thumbnail
image quickly finds the beginning of the segment.
Based on the thumbnail image position (cue point),
you can set an IN point and OUT point.
Writing Data in Tele-File
You can write the IN/OUT point set in the PC in Tele-
File.
..........................................................................................................................................................................................................
1) Tele-File
This is a system that can write and read material recorded on the tape using the non-contact IC memory built into the back
label of the cassette.
Tele-File is a trademark of Sony Corporation.