Sony HT-SS500 - Manual (Page 16)

16 GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB03CON_HT-SS500-CEL.fm masterpage: Left
model name1[HT-SS500]
2-682-472-11 (3)
The following illustration shows how to
connect video components such as DVD
player, DVD recorder, satellite tuner or VCR.
If you connect a DVD recorder
Be sure to change the factory setting of the
DVD input button on the remote so that you
can use the button to control your DVD
recorder. For details, see “Changing button
assignments” (page 43).
Notes
• You cannot do recording on the DVD recorder or
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Connecting video components
U
ANTENNA
SA-CD/CD
AUDIO IN AUDIO IN
VIDEO 1
R
L
R
AM
OPT IN
SA-CD/CD
DIGITAL
DVD
COAX IN
VIDEO 2
AUDIO IN
L
Satellite tuner
A
A Audio cord (not supplied)
B Coaxial digital cord (orange) (supplied)
DVD player/
DVD recorder VCR
B A
GB01COV_HT-SS500-CEL.book Page 16 Thursday, June 1, 2006 10:15 AM