Sony HT-SS500 - Manual (Page 37)

37 GB
C:\Documents and Settings\pc13\Desktop\PMRF_HT-
SS500\JC060000_2682472113SS500_GB\2682472113\GB04AMP_HT-SS500-CEL.fm masterpage: Right
T
uner O
p
e
ratio
ns
model name1[HT-SS500]
2-682-472-11 (3)
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
2
While holding down SOUND
FIELD +, press ?/1.
“S.F. CLR.” appears on the display and all
sound fields are reset to their initial
setting.
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 17).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 2.
INPUT SELECTOR MASTER
VOLUME
?/1
PRESET
TUNING SOUND FIELD MUTING
1,2
2
Tuner Operations
Area code FM AM
CEL, CEK 50 kHz 9 kHz
GB01COV_HT-SS500-CEL.book Page 37 Thursday, June 1, 2006 10:15 AM