Sony XR-CA370X - Manual (Page 15)

15
GB
Other Functions
Adjusting the balance and
fader
You can adjust the balance and fader.
1
Press (SEL) repeatedly until “BAL” or
“FAD” appears.
Each time you press (SEL), the item
changes as follows:
LOW* t MID* t HIGH* t
BAL (left-right) t FAD (front-rear)
* When EQ3 is activated (page 16).
2
Press either side of the volume button to
adjust the selected item.
Adjust within 3 seconds after selecting the
item.
Attenuating the sound
Press (ATT).
After “ATT-ON” momentarily flashes, the
“ATT” indication appears in the display.
To restore the previous volume level, press
(ATT) again.
“ATT-OFF” flashes momentarily.
Changing the sound and
display settings
The following items can be set:
• CT (Clock Time) (page 14).
• A.SCRL (Auto Scroll)* (page 17).
• M.DSPL (Motion Display)
– the demonstration mode which appears
when the tape is ejected and no source is
selected (e.g., tuner is turned off).
• BEEP – to turn the beep sound on or off.
1
Press (SEL) and the desired preset
number button simultaneously.
(SEL) + (2): CT
(SEL) + (3): A.SCRL*
(SEL) + (4): M.DSPL
(SEL) + (6): BEEP
* When no CD or MD is playing, this item will
not appear.
Note
The displayed item will differ depending on the
source.
2
Press (SEL) and the preset number
button repeatedly to select the desired
setting (Example: ON or OFF).