Sanyo DVD-SL33 - Manual (Page 23)

Random Playback [CD]
1. Press [PROGRAM/RANDOM] once in the stop mode.
• “Random” appears on the TV screen.
2. Press [ a PLAY] to begin random playback.
• “RND” appears on the FL display.
The unit will automatically select tracks at random.
Notes:
•
To stop random playback, press [ n ].
• [A-B REPEAT] and [SEARCH MODE] do not work during Ran-
dom Playback.
Programmed Playback [CD]
Up to 20 selections can be programmed.
Programming procedure
1. Press [PROGRAM/RANDOM] twice in the stop mode.
• “Program Mode” screen appears.
2. Press the number buttons to select the track number.
Example:
To select Track No.3, press [0], then [3].
To select Track No.10, press [1], then [0].
To select Track No.24, press [2], then [4].
Notes:
•
If you make a mistake, press [CLEAR].
• To quit the “Program Mode” screen, press [PROGRAM/
RANDOM].
3. Press [ 5 ] to move the highlighted box down.
Example:
Important Note:
“ ” may appear on the TV screen during operation. This
icon means that the function is not available on the disc now.
4. Repeat steps 2 and 3 as above to select another track.
5. Press [ a PLAY] to start playback.
• “PGM” appears on the FL display.
When all programmed selections have played, the unit stops
automatically.
•
The programmed contents are retained in memory.
Note:
To play the program again, press [PROGRAM/RANDOM]
twice
to call up the “Program Mode” screen, then press [ a PLAY].
2
1
LAST MEMO PICTURE MODE OPEN/CLOSE z/ON
REPEAT A-B REPEAT PROGRAM /RANDOM
ON SCREEN ZOOM ANGLE ANGLE REPLAY
SETUP MENU SUBTITLE CHANGE
4
a b
5
ENT
SUBTITLE ON/OFF
AUDIO RETURN TOP MENU
REV SLOW FWD SLOW
PAUSE/STEP
PREV NEXT
PLAY
REV FWD
n (Stop)
LAST MEMO PICTURE MODE OPEN/CLOSE z/ON
REPEAT A-B REPEAT PROGRAM /RANDOM
ON SCREEN ZOOM ANGLE ANGLE REPLAY
SETUP MENU SUBTITLE CHANGE
4
a b
5
ENT
SUBTITLE ON/OFF
AUDIO RETURN TOP MENU
REV SLOW FWD SLOW
PAUSE/STEP
PREV NEXT
PLAY
REV FWD
CLEAR
1 2 3 C
4 5 6 0
7 8 9
SEARCH MODE
CLEAR
3
2
5
1
To clear the program one by one
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [ 4 ] or [ 5 ] to select the track number.
3. Press [CLEAR].
To clear all the programs
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [ 4 ] to select “All Clear”.
3. Press [ENT].
To change the program
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” Screen.
2. Press [ 4 ] or [ 5 ] to select the track number.
3. Press the number buttons to select the track number to be
replaced.
Note:
To quit the “Program Mode” screen, press [PROGRAM/
RANDOM].
-E22-
DVD-SL33/CA(English) 13/06/2003, 10:06 23