Sanyo DVD-SL33 - Manual (Page 30)

Language Display Digital Out Parental
Once the initial settings have been completed, the unit can al-
ways be operated under the same conditions.
The settings will be retained in the memory until they are changed,
even if the power is turned off.
Setting Language
1. Press [SETUP] in the stop mode.
The setup screen appears.
“Language” is highlighted.
Notes:
•
In this instruction manual, the language in on-screen
display is English.
If you change the language, please follow the selected
language in on-screen display.
• You cannot switch audio sound track languages if there is
only one language recorded on the disc.
• When you play back a DVD video disc, the unit automati-
cally displays the pre-selected subtitle language if it is in-
cluded on the disc.
• If “Others” is selected, enter the language code. (See “LAN-
GUAGE CODE LIST” on page E33.)
• For improvement, on-screen displays subject to
change without notice.
INITIAL SETTINGS
Language Display Digital Out Parental
OSD
Audio
Subtitle
DVD Menu English
Disc
Disc
Disc
English
Español
Français
Deutsch
Portugues
Language Display Digital Out Parental
OSD
Audio
Subtitle
DVD Menu English
Disc
Disc
Disc
5. Press [ 5 ] or [ 4 ] to select the language (highlighted).
6. Press [ENT].
The selected language remains.
7. Repeat steps 3 ~ 6 for other items.
Note:
If “Others” is selected, enter the language code. (See “LAN-
GUAGE CODE LIST” on page E33.)
8. Press [ 4 ] to skip back to the setup screen (or press [SETUP]).
4. Press [ENT].
The submenu appears.
Example:
2. Press [ENT].
“Language” screen appears.
3. Press [ 5 ] or [ 4 ] to select the item (highlighted).
Example:
LAST MEMO PICTURE MODE OPEN/CLOSE z/ON
REPEAT A-B REPEAT PROGRAM /RANDOM
ON SCREEN ZOOM ANGLE ANGLE REPLAY
SETUP MENU SUBTITLE CHANGE
4
a b
5
ENT
SUBTITLE ON/OFF
AUDIO RETURN TOP MENU
REV SLOW FWD SLOW
PAUSE/STEP
PREV NEXT
PLAY
REV FWD
CLEAR
1 2 3 C
4 5 6 0
7 8 9
SEARCH MODE
SETUP
ENT
5
4
-E29-
DVD-SL33/CA(English) 13/06/2003, 10:06 30