3] transmittable documents, Document sizes, Paper thickness & weight 3. document types – Sharp FO-475TH User Manual
Page 5: Cautions on transmitting documents, Automatic document feeder capacity, Readable width & length
1 – 3
UX-258TH
FO-475TH
[3] Transmittable documents
1. Document Sizes
*
With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
3. Document Types
•
Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
•
Diazo copy (blue print)
Diazo copy documents of a normal contrast may be transmitted.
•
Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
•
Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
•
Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
•
All clips, staples and pins must be removed from documents be-fore
transmission.
•
Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
•
All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
Normal size
width
148 – 216 mm
length
140 – 297 mm
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. ADF 10 sheets
Special size: single sheet only (manual feed)
NOTES:
•
When you need to send or copy more pages than the feeder
limit, place additional pages in feeder when last page in
feeder is being scanned.
•
Place additional pages carefully and gently in feeder.
If force is used, double-feeding or a document jam may
result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
210 mm, max.
•
Readable length
This is the length of the document sent minus 4 mm from the top and
bottom edges.
Use document carrier sheet for smaller documents.
Readable width
Normal size
ADF 10
sheets
2.4 x 10
–3
–4.7 x 10
–3
inch
Thickness
Weight
0.15 x 10
–3
lbs/inch
2
Special size
Thickness 4.7 x 10
–3
–7.9 x 10
–3
inch
0.15 x 10
–3
–0.20 x 10
–3
lbs/inch
2
Weight
(Min.)
(Max.)
A4 size
(Max.)
140mm
297mm
600mm
148mm
216mm
[Normal size]
216mm
[Special size]
4mm
4mm
Readable length