Sanyo VCC-ZM400 - Manual (Page 56)

VIEW SETTING
F GAMMA correction setting
In addition to turning gamma correction ON or OFF, contrast sensitivity can be boosted at 2 levels.
1 Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (e.g. 1)
The VIEW SETTING 1 screen will appear.
2
Use the cursor button (j or l) to move the cursor to
ON for GAMMA, then use the cursor button (d or c) to
select the gamma correction.
Available settings:
• OFF: No gamma correction
• ON: Gamma correction ( γ = 0.45)
• SMART 1: Correction 1
• SMART 2: Correction 2 (improves contrast for dark
locations)
Note: When using SMART 1 or SMART 2, the target object may
be too bright, so determine which setting is better for the
target object.
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
1 2
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
55