Sony 3-877-030-12(1) - Manual (Page 30)

30 GB
Adjusting the delay between
the sound and the image (A/V
SYNC)
You can delay the sound using this function
when the image is behind the sound.
1
Press AMP MENU.
2
Press X/x repeatedly until “A/V SYNC”
appears, then press or c.
3
Press X/x to select the setting.
• OFF: Does not adjust.
• ON:
Adjusts the difference between
image and sound.
4
Press AMP MENU.
The AMP menu turns off.
• You may not be able to adjust the delay between
sound and image perfectly using this function.
• This function is useful only for Dolby Digital, DTS
and Linear PCM (2ch) input by coaxial (audio),
optical (audio) or HDMI.
Enjoying Dolby Digital sound
at low volume (AUDIO DRC)
You can narrow the dynamic range of the sound
track. This function is useful for enjoying movies
at low volume. AUDIO DRC only applies to
Dolby Digital sources.
1
Press AMP MENU.
2
Press x/X repeatedly until “AUDIO
DRC” appears, then press or c.
3
Press x/X to select the setting.
• OFF: No compression of dynamic range.
• STD: Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
• MAX: Compresses dynamic range fully.
4
Press AMP MENU.
The AMP menu turns off.
Notes
VOLUME
MUTING
ALBUM -
DMPORT
TV BD DVD SAT
LEVEL MODE DISPLAY
AMP MENU
INPUT SELECTOR
ALBUM +
RETURN
DMPORT
MENU
SOUND FIELD
AMP
MENU
C, X, x, c,
VOLUME
MUTING
ALBUM -
DMPORT
TV BD DVD SAT
LEVEL MODE DISPLAY
AMP MENU
INPUT SELECTOR
ALBUM +
RETURN
DMPORT
MENU
SOUND FIELD
AMP
MENU
C, X, x, c,