Sony 3-877-030-12(1) - Manual (Page 36)

36 GB
Formats supported by this
stand
Digital input formats supported by this system
are as follows.
* Linear PCM accepts sampling frequencies of no
more than 48 kHz.
Amplifier section
Reference Output Power
Surround mode
Front: 50 Watts/ch
(8 ohms at 1 kHz,
THD 10 %)
Center*: 50 Watts/ch
(8 ohms at 1 kHz, THD
10 %)
Subwoofer: 100 Watts/ch
(4 ohms at 100 Hz,
THD 10 %)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs (Analog)
TV
Impedance: 30 kohms
Inputs (Digital)
TV, DVD
Optical
SAT Coaxial, optical
HDMI section
Connector HDMI 19pin-standard
connector
Video inputs/outputs BD, DVD, SAT:
640 × 480p@60 Hz
720 × [email protected]/60 Hz
1440 × [email protected]/60 Hz
(pixel sent 2 times)
1280 × [email protected]/60 Hz
1920 × [email protected]/60
Hz
1920 × [email protected]/60
Hz
720 × 576p@50 Hz
1440 × 576p@50 Hz (pixel
sent 2 times)
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
Audio inputs BD, DVD, SAT: Linear
PCM 7.1ch/Dolby Digital/
DTS
Speakers
Front / Center speaker unit
Speaker system Bass reflex, magnetically
shielded
Speaker unit 40 × 70 mm cone type
Subwoofer unit
Speaker system Bass reflex
Speaker unit 160 mm, cone type
General
Power requirements 230 V, 50/60 Hz
Power consumption On: 70 W
Active Standby (Control
for HDMI is on):
1.5 W (minimum) to 5 W
(maximum)
Standby (Control for
HDMI is off): less than
0.3 W
Dimensions (approx.) 1,010 Ч 550 Ч 400 mm
(w/h/d)
Mass (approx.) 43 kg
Format Supported/Not supported
Dolby Digital a
DTS a
Linear PCM (2ch)* a
Linear PCM
(5.1ch, 7.1ch)*
(Only on HDMI) a
Dolby Digital Plus ×
Dolby True HD ×
DTS-HD Ч