Sony RDR-VX500 - Manual (Page 25)

25
H
ook
up
s and
Se
tti
n
gs
A
Connecting to audio L/R input
jacks
This connection will use your TV’s or stereo
amplifier’s (receiver’s) two speakers for sound.
Connect using the audio/video cord (supplied).
• Surround effect (page 60)
Surround1
Surround2
Surround3
Note
Do not connect your TV’s audio output jacks to the LINE
IN (AUDIO L/R) jacks at the same time. This will cause
unwanted noise to come from your TV’s speakers.
B
Connecting to a digital audio
input jack
If your AV amplifier (receiver) has a Dolby *1
Digital or DTS *2 decoder and a digital input jack,
use this connection.
Connect using a coaxial or optical digital cord (not
supplied).
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch)
*1 Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories.
*2 “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make the
appropriate settings under “Audio Connection Setup”
in Easy Setup (page 30). Otherwise, no sound or a loud
noise will come from your speakers.
• The surround sound effects of this recorder cannot be
used when you connect using a coaxial or optical
digital cord.
• This recorder does not support Linear PCM playback
with 2 channels or more.
Yellow
White (L)
Red (R)
Yellow
White (L)
Red (R)
TV
TV
TV
: Virtual speaker
Coaxial cord
Optical cord