Recording a program to a dvd disc – Sony RDR-VX500 User Manual
Page 38
38
1
Turn on the TV.
2
Press "/1.
The recorder turns on.
3
Switch the input selector on your TV so that
the signal from the recorder appears on the
TV screen.
When connecting the recorder to the TV using
only the antenna cable, see “Setting the RF
Output channel” on page 19.
4
Slide the TV/DVD·VIDEO switch to
DVD·VIDEO, then press VIDEO to control
the VCR.
5
Insert a tape.
The VCR starts playing automatically if you
insert a tape with its safety tab removed.
6
Press H PLAY.
To stop playback
Press x STOP.
Recording a Program to a
DVD Disc
The following explains how to record a current
TV program to a DVD disc.
1
Turn on the TV.
2
Press "/1.
The recorder turns on.
3
Switch the input selector on your TV so that
the signal from the recorder appears on the
TV screen.
When connecting the recorder to the TV using
only the antenna cable, see “Setting the RF
Output channel” on page 19.
4
Slide the TV/DVD·VIDEO switch to
DVD·VIDEO, then press DVD to control the
DVD recorder.
+
R
-RW
VR
-RW
Video
+
RW
-
R
z
REC
TV/DVD·VIDEO
switch
"/1
x
STOP
Z
OPEN/
CLOSE
CH +/–
DVD
REC MODE
INPUT
SELECT