Sony RDR-VX500 User Manual
Page 31
31
H
ook
up
s and
Se
tti
n
gs
6
Select “Auto,” and press ENTER.
The recorder will automatically search for a
channel that carries a time signal when you
turn off the recorder after finishing Easy
Setup.
• If broadcasters in your area are not yet
sending time signals, select “Manual,” and
press ENTER. Press
M/m to set the month
and press
,. Set the day, year, hour,
minutes, and AM/PM in the same way. The
day of the week is set automatically.
7
Select whether or not you have a cable
connection.
If you use an antenna only (no cable TV),
select “Antenna.”
If you use a cable connection without a cable
box, select “Cable.”
8
Press ENTER.
The Tuner Preset function automatically starts
searching for all of the receivable channels
and presets them.
To set the channels manually, see page 98.
After the Tuner Preset is finished, the setup
display for selecting the aspect ratio of the
connected TV appears.
9
Select the setting that matches your TV
type.
“4:3 Letter Box”: For standard TVs.
Displays “wide screen” pictures with bands
on the upper and lower sections of the screen.
“4:3 Pan Scan”: For standard TVs.
Automatically displays “wide screen”
pictures on the entire screen and cuts off the
sections that do not fit.
“16:9”: For wide-screen TVs or standard TVs
with a wide screen mode.
For details, see “Video Settings (Video)” on
page 100.
10
Press ENTER.
The setup display for selecting the type of
Dolby Digital signal appears.
11
Select the type of Dolby Digital signal you
want to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
12
Press ENTER.
The setup display for selecting the type of
DTS signal appears.
Select the way in which you will receive
channels.
Easy Setup
Antenna
Cable
Easy Setup
Searching for receivable channels. 25
Please wait.
Select your TV screen type.
Easy Setup
16 : 9
4 : 3 Letter Box
4 : 3 Pan Scan
10:10 AM
Dolby Digital
Easy Setup
D-PCM
Dolby Digital
10:10 AM
DTS
Easy Setup
On
Off
10:10 AM
,
continued