SECO-LARM USA Mini PTZ Camera EV-7105-PPEQ - Manual (Page 25)

26
ENFORCER Mini PTZ Camera
SECO-LARM, U.S.A., INC.
PRESET MENU
From DOME CAMERA SETUP
PRESET NO.
[1~94, 96~128]
If the PRESET number has already been
defined, the camera immediately moves
to the pre-set PRESET position and
characteristics. If not, "UNDEFINED" is
shown on the screen
Note: If a PRESET position is already
defined, the user can make
changes by selecting that
PRESET position number and
then changing the SCENE,
LABEL, and CAM ADJUST
settings.
CLR PRESET
[CANCEL / ON]
Choose "CANCEL" to delete the current
PRESET data.
<EDIT SCENE> Redefines the current PRESET scene
position. See page 27
<EDIT LABEL>
Allows user to display a note about this
preset position when the camera moves
to the PRESET position, up to a
maximum of 10 characters.
CAM ADJUST
[GLOBAL / LOCAL]
This sets the WB (white balance) and AE
(auto exposure) modes. "GLOBAL" mode
means that the WB and AE settings for
all PRESET positions are the same as
configured in the WB SETUP menu
under the ZOOM CAMERA SETUP menu
(see page 22). "LOCAL" mode means
that each PRESET position has its own
WB and AE settings
NOTE: The <EDIT LABEL> and CAM ADJUST screens are
not visible unless the <EDIT SCENE> function
is selected.
PRESET NO. 1
CLR PRESET CANCEL
<EDIT SCENE>
<EDIT LABEL>
CAM ADJUST
GLOBAL
PRESET MENU
EXIT
BACK
This menu configures up to 127 different preset locations to
which the camera can be instantly moved.