SECO-LARM USA Mini PTZ Camera EV-7105-PPEQ - Manual (Page 29)

30
ENFORCER Mini PTZ Camera
SECO-LARM, U.S.A., INC.
GROUP SETUP Menu
From DOME CAMERA SETUP
GROUP NO. 1
UNDEFINED
CLEAR GROUP CANCEL
<EDIT GROUP>
GROUP SETUP
EXIT
BACK
Configures up to eight groups of motions, with each group
consisting of any combination of up to 20 actions, including
PRESETS, SWINGS, PATTERNS, and temporary halts in
the action.
GROUP NO
[1 ~ 4]
Selects which GROUP number to edit. If
the selected GROUP number has not yet
been programmed, "UNDEFINED" will be
displayed under the selected GROUP
number
CLR GROUP
[CANCEL / OK]
Choose "OK" to delete the data in the
selected GROUP
<EDIT GROUP> Goes to the "EDIT GROUP" menu. See
below
NO ACTION ### DWELL OPT
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
EDIT GROUP 1
CANCEL [NEAR:EDIT]
SAVE
NO ACTION ### DWELL OPT
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
EDIT GROUP 1
CANCEL [ ▲▼:CHANGE VAL.]
SAVE [ ◄►:MOVE CURSOR]
NO ACTION ### DWELL OPT
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
EDIT GROUP 1
CANCEL [FAR : EDIT :END]
SAVE [NEAR:EDIT ACT]
1. Press the NEAR key on the "NO" line to start the
GROUP setup.
2. Use the joystick or arrow keys to move up and down to
select the number of the ACTION to configure. There are
a maximum of 20 ACTIONS which can be done in
each GROUP.
3. Set the ACTION, DWELL time, and OPT (option) for each
action. The item ready for configuring is displayed in
reverse text. Move the joystick/arrow cursor right and left to
select items to configure, and then move the joystick/arrow
cursor up and down to change the value of the ACTION.
ACTION ### [NONE / PRESET / SWING / PATTERN]
DWELL
[0 seconds ~ 4 minutes]
NOTE — DWELL configures how long the
camera waits between each ACTION.
OPT
Option. If PRESET is selected as the
ACTION, this will be the PRESET speed.
If PATTERN or SWING is selected as the
ACTION, set OPT for the number of times
the PATTERN or SWING is repeated.