SanDisk UM809 - Manual (Page 10)

3
Basic Usage
This chapter provides you the basic usage instructions for your
Sansa
® Clip+ MP3 player.
Basic Usage
Power Button
The power button is located on the top of the player. It can turn the player on or off, lock or
unlock the buttons, or reset the player.
Power On
Press the Power button once to turn on the player. The Main Menu will appear after it
has been booted up.
Power Off
Press and hold the Power button for approximately 2 seconds to turn off the player.
Lock Function
All function keys will be disabled once Lock is engaged by pressing-and-holding the
Home button once while the player is powered on. All the buttons on the Sansa ®
Clip+ MP3 player will not operate when Lock is active. Please note that the Lock
function only works when the player is on.
The following message will appear on the display screen if any buttons is pressed
while the player is in the locked position. Music should continue to play even if the
player is locked.
To
unlock the player, press-and-hold the Home button until an “Unlocked” message
appears.
7