SanDisk UM809 - Manual (Page 8)

Playback Screen
1 Shuffle Indicates that the Shuffle function is enabled
2 Repeat Indicates that the Repeat function is enabled
3 Current/Total Tracks Displays the current track number and the total number of tracks
4 Battery Indicator Displays the battery status
5 Artist Name Displays the artist name
6 Title Displays the track name
7 Play Time Displays the elapsed time
8 Progress Bar Displays the progress of the current track
9 Play/Pause Displays the music or recording playback status
Battery
The Sansa ® Clip+ MP3 player comes with an internal rechargeable battery. To use the player
for the very first time, remember to fully charge the battery. You can charge your Sansa ®
player through the USB port of your computer, a car adapter (not included), or AC adapter
(not included).
Charging
To charge the battery, please follow these steps:
1. Connect the larger end of the USB cable into an available USB port on the PC.
2. Connect the smaller end of the USB cable into the Sansa
® Clip+ MP3 player.
3. The computer must be on for most USB ports to charge your battery. Your Sansa ®
will show connected and the yellow charging indicator will appear. The battery
level indicator will blink while charging. You will not be able to play music while
the player is connected to a computer.
4. To stop recharging, disconnect the USB cable.
Sansa ® Clip+ Overview
5