Xl-3000v – Sharp XL-3000V User Manual

Page 47

Advertising
background image

– 47 –

XL-3000V

• Sled motor operation failure.

Yes

Yes

Is following sled feed signal output the pin 53 (FMO) of IC802
when FF

/REW

key is pressed after the CD TEST

MODE "STEP 1" is set?

Is sled feed signal output the pins 1 and 2 of IC804?

Is sled feed voltage applied between both terminals of sled
motor?

No

Check the peripheral parts of IC804. If OK, IC804 is faulty.

No

C802 is faulty.

Check the CNW803/CNS803.

No

Yes

Check the CD mechanism (periphery of sled motor).
If the sled motor does not run when DC2.0V is applied to
both terminals of sled motor, the sled motor is faulty.

• Sled servo failure.

Yes

Is following sled signal output the pin 53 (FMO) of IC802
during playback?

Normal.

No

IC802 is faulty.

• Track search failure

Does the sled motor run in FF/REW state when the SERVO
TEST MODE "STEP1" is set?

Is the following wave output to the pin 49 (TRO) of IC802
during track search in normal playback?

Is the following wave output to the pins 12 (TEO) of IC801
during track search in normal playback?

Yes

Yes

No

Check as stated in item "SLED MOTOR OPERATION FAILURE".

No

IC802 failure.

No

Check the PWB pattern between pin 49 (TRO) of IC802 and pin
19 of IC804.
Check the PWB pattern between pins 17 and 18 of IC804 and
Optical pickup.
If OK. Optical pickup failure.

Yes

Is the above wave output to the pins 46 (TEI) and 47 (TEZI) of
IC802 during track search in normal playback?

No

Check the PWB pattern between pin 12 (TEO) of IC801 and pins 46
and 47 of IC802. If OK. IC801 failure.

Normal.

Yes

Yes

Is following sled feed signal output the pins 3 and 4 of IC804
when FF

/REW

key is pressed after the CD TEST

MODE "STEP 1" is set?

Check the PWB pattern between pin 53 of IC802 and pins 3 and 4
of IC804.

No

Is the following wave output to the pin 41 (RFZI) and 42
(RFRP) of IC802 during track search in normal playback?

No

Check the PWB pattern between pin 17 (RFO) and 18 (RFIS), 19
(RFRP) of IC801 and pins 41 and 42 of IC802. If OK. IC801 failure.

Yes

TRO

TEO

TEI

TEZI

FF

REW

FMO

FMO

RFZI

RFRP

FF

REW

SL

±

Advertising