Sony STR-DB1080 - Manual (Page 48)

48 GB
Advanced settings (continued)
x T.TONE (Test tone mode)
Lets you select the test tone output mode
(page 23).
• NORMAL
Lets you output the test tone from each speaker in
sequence.
• PHASE NOISE
Lets you output the test tone from two adjacent
speakers at a time in sequence.
• PHASE AUDIO
Lets you output the source sound instead of the test
tone from two adjacent speakers at a time in
sequence.
x COLOR SYSTEM
(OSD color system)
(Except for models of area code U, CA)
Lets you select the color system.
• NTSC
• PAL
x OSD COLOR
(Color of the on-screen display)
Lets you select the color of the on-screen display.
• COLOR
The on-screen display is displayed in color.
• MONOCHROME
The on-screen display is displayed in monochrome.
x OSD H.POSITION
(OSD horizontal position)
Initial setting: 4
Lets you adjust the position of the on-screen display
horizontally. You can adjust from 0 to 64.
x OSD V.POSITION
(OSD vertical position)
Initial setting: 4
Lets you adjust the position of the on-screen display
vertically. You can adjust from 0 to 32.
x COMMAND MODE (Command mode)
Lets you select the command mode of the remote. If
the command mode of the receiver and the remote is
different, operation from the remote is not possible.
• AV1
• AV2
x NAME IN?
(Naming preset stations and functions)
For details, see “Naming preset stations and
functions” on page 56.
Advanced SET UP menu
parameters
When “MENU EXPAND” is set to “ON”, all
of the following parameters are displayed and
adjustable.
See page 21 for the SET UP menu adjustments.
Initial settings are underlined.
All SET UP menu parameters
FRONT SP
CENTER SP
SURROUND SP
SURR BACK SP
SUB WOOFER
FRONT XX.X meter* 1 * 2
CENTER XX.X meter* 1 * 2
SURROUND XX.X meter* 1 * 2
SURR BACK XX.X meter* 1 * 2
SUB WOOFER XX.X meter* 1 * 2
S.W PHASE* 1
DISTANCE UNIT* 1 * 2
SURR POSI.* 1
SURR HEIGHT* 1
SURR BACK HGT.* 1
FRONT SP > XXX Hz* 1
CENTER SP > XXX Hz* 1
SURROUND SP > XXX Hz* 1
SURR BACK SP > XXX Hz* 1
LFE HIGH CUT > XXX Hz* 1
* 1 Adjustable only when “MENU EXPAND” is set
to “ON”.
* 2 Default unit is “feet” for models of area code U,
CA.
Default unit is “meter” for models of other area
codes.