Silicon Optix Open Eye Pro-Pack Dome Camera CM-525P - Manual (Page 16)

27104AF
16
The dome camera must be installed by qualified service personnel in accordance with all local and federaI electrical
and building codes. The system should be installed according to Figures 3 through 9.
To prevent damage, each dome camera must have a unique address (ID). When installing multiple dome cameras
using a multiplexer, it is suggested that the dome camera address match the multiplexer port number.
2. INSTALLATION / CONFIGURATION
Figure 7 - Example Termination Diagram
Figure 8 - Setting Address (ID) of DomeCamera
1
2 0 0
0 0
999 9 9 9
2
1
. . . .
Dome ID SW100 SW10 SW1
E. SETTING THE CAMERA ADDRESS (ID)