Silicon Optix Open Eye Pro-Pack Dome Camera CM-525P - Manual (Page 19)

27104AF
19
2. INSTALLATION / CONFIGURATION
2.3 Getting Started
Once installed, apply power to the dome camera. Once power is turned on, the dome camera will start a
configuration sequence. When configuration is done, the following information is displayed.
LOADING DOME ADDRESS (001)
CHECKING EEP ROM
INIT. CAMERA (OK)
INIT PAN (OK)
INIT TILT (OK)
OPTIX DOME 1
CAMERA TYPE: 25XDN
COMM. MODE: RS-485
BAUD RATE: 9600