Silicon Optix Open Eye Pro-Pack Dome Camera CM-525P - Manual (Page 47)

27104AF
47
5. TECHNICAL SPECIFICATIONS
Camera: CM-525P
Minimum Illumination
Lens
S/N ratio
Minimum Object Distance
General
Certifi cation
Image Sensor
NTSC
PAL
Horizontal Resolution
Pan Angle
Manual Speed
Preset Speed
Tilt Angle
Manual Speed
ID (Camera Address)
Preset Position
Ambient Environment Temperature
Alarm Out
Alarm Input
On-Screen Display
Tour
Pattern
Flip
Communication Type
Micro Step
Access Time
Electrical
Input Voltage
Power
Power Source
Power Consumption
Mechanical
Construction
Finish
Dome Bubble
1.0 lx (30IRE); Day & Night Off (Color)
0.1 lx (30IRE); Day & Night On (B&W)
0.01 lx; Slow Shutter X 128 On
0.001 lx (30IRE); Day&Night On (B&W)+ DSS
25X Optical Zoom with Auto Focus
(10X Digital Zoom (F = 1.6~3.7, 50IRE, 3.8mm~95mm)
50 dB
0.1m
CE EMC, FCC CLASS A
1/4” SONY Super HAD CCD, 768(H)x494(V)
1/4” SONY Super HAD CCD, 752(H)x582(V)
470/460 lines (NTSC/PAL)
360
o continuous rotation
0.1 o to 90 o (Proportional Zoom)
Turbospeed: 360 o /sec. maximum, w/ ctrl pressed
360 o /sec. maximum
0 o to 90 o (User selectable to prevent obstruction of the horizontal
view)
0.1
o to 90 o /sec. (proportional to zoom)
999 Selectable Addresses (4095 Optional)
319 Positions with camera status (16-character title)
-45
o C to 50 o C
4 Relays 24 VDC/1AMax (selectable NC/NO)
8 Normal open, dry contact (programmable NC/NO)
Displays camera ID, Pan/TiltAngle, Flip, Zoom, Privacy Zone
8 Guard Tours (Preset, Pattern, AutoScan, Tour Input)
4 pattern, 240sec Memory
Rotate 180
o at bottom of tilt
RS-485/422, Baud Rate: 9600bps/(STD), (OPT: 4800, 2400, 1200)
0.01
O
0.75 second maximum preset recall time
20 to 28VAC; 24VAC nominal, built-in power-line surge
Nominal 24VAC/VDC 2A maximum
24VAC, 50/60Hz
Heater 20watts X2
Blower 2watts
Dome Camera 20watts
Aluminum steel and Plastic
Polyester Power Coat
Poly carbonate
See Dimensions section
IP 65
Approx. 5Kg (11.02lbs)